-
-
-
-
whatsapp
-
WeChat
Products
Intermediate packaging machine for soft packs TD300H (with layering)
Main technical parameters 1. Packaging specification: – Maximum length of intermediate packaging: 500 mm – Width of intermediate packaging: 130-420 mm – Height of intermediate packaging: 90-220 mm – Shape of intermediate packaging: * Single layer: one row, two rows, three...
Description
marker
Main technical parameters
1. Packing Specification:
- Maximum length of intermediate packaging: 500 mm
- Intermediate packaging width: 130–420 mm
- Height of intermediate packaging: 90–220 mm
- Form of intermediate packaging:
* Single layer: one row, two rows, three rows
* Double layer: two rows, three rows, vertical laying, horizontal laying
* Three-layer: two rows horizontally
Packing methods are shown below:
Fig. 1 pack in one row
Fig. 2 Packing in two rows
Fig. 3 Packing in three rows
Fig. 4 Packing in two rows, two layers
Fig. 5 Packing in three rows, two layers
Fig. 6 Packing in two rows, three layers
2. Bag material for intermediate packaging: ready-made M-type bag (M-sleeve) with ventilation holes (the thickness of one layer of the bag is 40–60 microns, the diameter of the holes is 5–6 mm). Suitable materials: OPP, CPP, PE (the material must have double-sided heat sealing, the hole for the handle must be through, the bag must have good antistatic properties and not stick together).
3. Packing speed:
- Single layer, single row: ≤ 45 packs/min (pack of 3 packs)
- Single layer, two rows: ≤ 40 packs/min (pack of 6 packs)
- Double layer: ≤ 18 packs/min
- Three-layer: ≤ 10 packs/min
4. Power supply: power supply 380 V ± 5%, 50 Hz ± 5%, three-phase, four-wire + grounding. Control voltage: DC 24 V.
5. Required air pressure: approximately 0.6–0.7 MPa, air flow: 330 l/min (customer provides compressed air supply).
6. Equipment power: installed power per machine is approximately 22 kW, power consumption is approximately 20 kW.
.7. Equipment safety: safety marking according to CE standards.
8. Waste packaging material: trimmings during sealing - 25–30 mm, are removed by an automatic film suction system into a waste container.
Characteristics and Features
1. Control using motion controller and servo motors. High ergonomics, easy operation, accurate positioning, more stable operation.
2. The power of all drives is 20% higher than the power of the corresponding servo motors; The power of the frequency converter is 20% higher than the power of the engine.
3. Compact structure, small footprint, easy to connect to the production line.
4. Using well-known domestic and foreign components, high stability and reliability.
5. Unique automatic product feeding and leveling mechanism allows you to quickly switch between single-row/double-row and single-layer/multi-layer packaging. The design is thought out for ease of maintenance.
6. Automatic and accurate feeding of packages, automatic alarm or stop when there is no package.
7. Overload protection function. When the overload protection is triggered, after manually resetting the protection mechanism, pressing the reset button should automatically restore the servo system to synchronization (slow return to its original position).
8.Heat is controlled using a patented thermal control system to ensure a perfectly even seam.
9. Sensors: photo sensors manufactured by Omron or SICK - high detection stability.
10. Supply of packages from the store: two stores for ready-made packages (working and reserve). The capacity of each store is up to 400 bags. Replacing bags without stopping the machine. Automatic signaling at the end of packages in a working magazine and automatic switching to a backup one.
11. All actions of pneumatic cylinders, suction devices and heating circuits can be set to manual or automatic mode on the touch panel.
12. Separate receiver for the main source of compressed air. Connection of the main air pipeline is with a Ø12 mm pipe. When the machine comes to a complete stop, all purge devices are automatically switched off. Starting is not possible if there is insufficient air pressure.
13. Combination of high-performance air blower and high-power, large-flow fan for precise bag feeding, high opening percentage and good suction shaping.
contact us
Related Popular Products
Single Roll Paper Packing Machine ZB520AD
Equipment Description Five-axis servo control system The machine is equipped with a modern ...
Fully Automatic Roll Paper Rewinding Machine SCF-250-2900
Equipment Description Fully Automatic Roll Paper Rewinding Machine N...
ZB300HT Paper Tissue Packing Machine
Product Description ZB300HT High Speed Paper Tissue Packing Machine...
Film paper roll packaging machine ZB520P
Main technical characteristics Parameter Value Model ZB520P Acceleration speed...
Straightening and styling machine WL1500
Equipment Description Model WL1500-2 is a high-speed automatic...
Multi Roll Toilet Paper Packing Machine ZB680F
Main technical characteristics Parameter Value Model ZB680F Design ...
Fully automatic line for soft packs
Product Description Fully Automatic Soft Pack Production Line O...
Intermediate (secondary) packaging machine for bottom-pull products TD330DNS
Main technical parameters 1 Equipment model: TD330DNS 2. Packaging specification...
Single Roll Toilet Paper Packing Machine ZB530
Main advantages of the equipment Modern compact design Machine developed...
Single Channel Large Rotary Tissue Cutting Machine CY300S
Main Parameters of Single Channel Large Rotary Tissue Cutting Machine...
Bottom pull cotton napkin wrapping machine ZB800MD
Main technical characteristics Parameter Value Model ZB800S Maximum...
Intermediate packaging machine for soft packs TD300ANS
Product Description Intermediate packaging machine for soft packs TD300ANS Packaging...
Cotton napkin folding machine SCZM-200-1650/2250/3400
Description of equipment The automatic line SCZM-200 is designed for high-speed...
ZB300HG High Speed Paper Napkin Packing Machine
Product Description ZB300HG High Speed Tissue Paper Packaging Machine...
Paper Towel Packing Machine ZB800MC
Main technical characteristics Parameter Value Model ZB800MC Maximum...