
Main technical parameters 1 Equipment model: TD330DNS 2. Packaging specification: – Length of the finished product: 150-450 mm – Width of the finished product: 120-200 mm – Height of the finished product: 85-130 mm 3. Packaging form: Loose napkins are directly packed into a package...
1 Equipment model: TD330DNS
2. Packing specification:
- Finished product length: 150–450 mm
- Finished product width: 120–200 mm
- Finished product height: 85–130 mm
3. Packaging form: Scattered napkins are directly packed into an intermediate packaging bag.
4. Bag material: ready-made M-type bag (M-sleeve) with ventilation holes (the thickness of one layer of the bag is 60–80 microns, the diameter of the holes is 5–6 mm). Suitable materials: OPP, CPP, PE (the material must have double-sided heat sealing, the hole for the handle must be through, the bag must have good antistatic properties and not stick together).
5. Packing speed: design speed ≤ 60 packs/min, operating speed 15-60 packs/min (depending on specification).
6. Power supply: power supply 380 V ± 5%, 50 Hz, three-phase, four-wire + grounding. Control voltage: DC 24 V.
7. Required air pressure: approximately 0.6–0.7 MPa (customer provides compressed air supply).
8. Equipment power: installed power per machine - 24 kW, power consumption - approximately 18 kW.
9. Waste packaging material: trimmings during sealing - 25–30 mm, are removed by an automatic film suction system into a waste container.
1. Control by motion controller using 12 servos. High ergonomics, easy operation, accurate positioning, more stable operation. Fully automated operations: gripper extension, bag picking, bag feeding, bag opening, pack ejection, corner bending, sealing, etc.
2. Low power consumption: installed power ≤ 24 kW, normal power consumption ≤ 18 kW.
3. Compact structure, small footprint, easy to connect to the production line.
4. Using well-known domestic and foreign components, high stability and reliability.
5. Automatic and accurate feeding of packages, automatic alarm or stop when there is no package.
6. Overload protection function.
7. Heat is controlled using a patented thermal control system to ensure a perfectly even seam.
8. Sensors: photo sensors manufactured by SICK - high detection stability.
9. Supply of packages from the store: four stores for ready-made packages (two working and two reserve). The capacity of each store is up to 400 bags. Replacing bags without stopping the machine. Automatic signaling at the end of packages in a working magazine and automatic switching to a backup one.
10. All actions of pneumatic cylinders, suction devices and heating circuits can be set to manual or automatic mode on the touch panel.
11. Separate receiver for the main source of compressed air. Connection of the main air pipeline is with a Ø12 mm pipe. When the machine comes to a complete stop, all purge devices are automatically switched off. Starting is not possible if there is insufficient air pressure.
12. Adopting powerful, high-performance, low-pressure, large-flow control to ensure accurate bag feeding, high bag opening success rate and good suction forming effect.
13. Places that require adjustment (such as bag guides, bag opening, bag magazines, etc.) are equipped with an electric drive for convenient and quick adjustment.